RWD: Trans, 16V conv, cam, head, block, BOV, Diff

[Phil]

Voici des liens qui proviennent de Turbobricks qui peuvent être très pratiques.

---------------------------------------------------
Transmission/Gear Ratio discussions
T5/Getrag/M46/M90 comparions - http://forums.turbobricks.com/showthread.php?t=104624

16v conversion topics: (searched "16v" in the subject line only)
16v Turbo FAQ - http://forums.turbobricks.com/showthread.php?t=31900
16v DOHC vs. 8v SOHC - http://forums.turbobricks.com/showthread.php?t=2794
16v questions - http://forums.turbobricks.com/showthread.php?t=4748
16V tuned length turbo header available - http://forums.turbobricks.com/showthread.php?t=1518
B234 16V - http://forums.turbobricks.com/showthread.php?t=3027
Loads of Volvo 16v Info - http://forums.turbobricks.com/showthread.php?t=16750
Valve Reliefs info request - http://forums.turbobricks.com/showthread.php?t=12163
16v Motor Build Up - http://forums.turbobricks.com/showthread.php?t=21873
16v Turbo Pictures - http://forums.turbobricks.com/showthread.php?t=26256
242GT 16v progress - http://forums.turbobricks.com/showthread.php?t=25259
i think i found the cheapest 16v tensioner! - http://forums.turbobricks.com/showthread.php?t=19356
ovlov.net DOHC on b230 tensioner/belt kit! - http://forums.turbobricks.com/showthread.php?t=6038
16V valve reliefs http://forums.turbobricks.com/showthread.php?p=1708755

Heads/porting/design/etc.. (searched for "head" or "531" or "405" in the subject line only)
160 vs P&P 398 vs 405 pics - http://forums.turbobricks.com/showthread.php?t=3670
531 head question - http://forums.turbobricks.com/showthread.php?t=22742
Modified cylinder head - http://forums.turbobricks.com/showthread.php?t=16935
HP Gain of the 531? - http://forums.turbobricks.com/showthread.php?t=18246
What were the reasonings for 530 beating 531? - http://forums.turbobricks.com/showthread.php?t=8523
can I use a 405 head? - http://forums.turbobricks.com/showthread.php?t=5413

Blocks/stroke/penta/etc.. (searched for "block" or "penta" in the subject line only)
Update on B23 Stroker Engine - http://forums.turbobricks.com/showthread.php?t=20579
Penta FAQ - http://forums.turbobricks.com/showthread.php?t=24675
Old question rehashed: Maximum bore - http://forums.turbobricks.com/showthread.php?t=25961
is short stroke/high rpm worth it? - http://forums.turbobricks.com/showthread.php?t=23427

Cam questions (A/B/K/VX3/V15/etc) (searched for "cam" in the subject line only)
M cam vs. B cam vs. K cam - http://forums.turbobricks.com/showthread.php?t=1392
Additional M vs. K cam testing - http://forums.turbobricks.com/showthread.php?t=1427
Reveiw of VX Cam, IPD 2.25" exhaust (N/A) - http://forums.turbobricks.com/showthread.php?t=23522
IPD turbo cam versus VX - http://forums.turbobricks.com/showthread.php?t=19799
New Adjustable Cam Gear - a fine-tuning advantage - http://forums.turbobricks.com/showthread.php?t=1575

Blow-Off Valves (BOV) (searched for "BOV" or "Blow" in the subject line only)
BOV on b21ft w/ T3 - http://forums.turbobricks.com/showthread.php?t=1537
Blow off Valve on an 240 turbo 83 - http://forums.turbobricks.com/showthread.php?t=11141
LH 2.4 ECU info, BOV work or not? fuel cut @ what voltage? - http://forums.turbobricks.com/showthread.php?t=16099
How bad is the rich spike if I put a BOV on my 740? - http://forums.turbobricks.com/showthread.php?t=4086
DSM BOV mod for quick release and higher boost - http://forums.turbobricks.com/showthread.php?t=12105

Limited Slips/Lockers/Diferentials (searched for "LSD" or "diff" in the subject line only)
Whats the weakness in the Dana 30? - http://forums.turbobricks.com/showthread.php?t=22367
90+ Locker Differential In Pre 90 1031 - http://forums.turbobricks.com/showthread.php?t=15284